PremierArt Print Shield

Best for Paper. PremierArt Print Shield is best coating for prints that require an increase in lightfastness and scuff resistance. It is also excellent for the elimination of gloss differential. SKU 21946
SKU: 21946
Manufacturer part number: 3001-101
Manufacturer: Premier Imaging
$19.95

PremierArt Print Shield

Increase the life of your inkjet prints! Print Shield is a lacquer spray that will protect the print from light, ozone, VOC’s, scuffing, yellowing and adds to water resistance. Its low dissolved solids formula, (few solids to change surface characteristics), will not change the surface of the paper. You select a paper for its physical characteristics, and this spray will retain the original look.

It will also eliminate gloss differential, the gloss difference between inked and non-inked surfaces, which gets worse as the gloss of the paper increases. Bronzing, the changing of the color of the ink when viewed at an angle and commonly experienced when photo papers are printed with pigment inks, is also eliminated.

Being solvent based, care must be taken during application. It must be applied in a well -ventilated area such as a spray booth, or outside. Protective gear such as a mask must also be used. Print Shield has been certified by Wilhelm and recommended by Epson.

MFG Part number: 3001-101

PremierArt Print Shield

Increase the life of your inkjet prints! Print Shield is a lacquer spray that will protect the print from light, ozone, VOC’s, scuffing, yellowing and adds to water resistance. Its low dissolved solids formula, (few solids to change surface characteristics), will not change the surface of the paper. You select a paper for its physical characteristics, and this spray will retain the original look.

It will also eliminate gloss differential, the gloss difference between inked and non-inked surfaces, which gets worse as the gloss of the paper increases. Bronzing, the changing of the color of the ink when viewed at an angle and commonly experienced when photo papers are printed with pigment inks, is also eliminated.

Being solvent based, care must be taken during application. It must be applied in a well -ventilated area such as a spray booth, or outside. Protective gear such as a mask must also be used. Print Shield has been certified by Wilhelm and recommended by Epson.

MFG Part number: 3001-101

Products specifications
Coatings Solvent-based
Size 12 oz Aerosol Can
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Products specifications
Coatings Solvent-based
Size 12 oz Aerosol Can