Kodak PHOTO TEX Fabric, 42" x 100' - EX Aqueous

KODAK PHOTO TEX Repositionable Fabric sticks to any non-porous flat surface and removes easily with no residue. Produces sharp looking, seamless graphics and photographic images every time. The adhesive is removable, reusable, and repositionable. 42" x 100', 6 mil, 240 g/m | SKU KPTEX4200
SKU: KPTEX4200
Manufacturer part number: KPTEX4200
Manufacturer: Kodak
$460.00

KODAK PHOTO TEX Repositionable Fabric is ideal for life-size photographic cut-outs for walls and wall murals. It also works great for a variety of indoor and outdoor applications, including windows, backlits, doors, sign boards, and other flat surfaces.

It does not remove paint from a primed wall and can safely be applied over wallpaper without wrinkles or ripping. This Repositionable Fabric is compatible with both piezo and thermal printhead technologies.

 

Technical Specifications

Material

40-45% polyester, 40-45% pulp-cellulose

Gauge

10 mil (557kg/m): Base 6 mil, liner 4 mil

Weight

240 gsm

Ink Compatibility

eco-solvent, solvent and uv-curable.

Software Setting

Optimized printer settings will vary from printer manufacturers. A fine art paper or matte paper setting is an appropriate starting point. However, we recommend that you try different settings to achieve optimum performance for your specific application.

Color Matching

For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software.

Finishing/Post Processing

Use a carbide knife for kiss and die cutting. For additional protection, liquid or spray coatings are recommended. Recommended outdoors for up to six months without additional protection.

Lightfastness

The fading time of inkjet ink is a direct result of the inks you choose and the environment where the print is displayed. Contact the ink manufacturer to determine suitability for a particular application.

Optimal Service Environment

For printing: 59-77° F, 20-80% Relative Humidity For end use: 0 to 176° F

Handling Recommendations

Due to the absorptive nature of the coating, you should avoid touching the coated surface of the film. To install the graphic, peel 4 inches of the liner off the graphic and place on wall. Continue to peel back 4 inches of the liner incrementally while mounting.

Ideal Storage Conditions

50-80° F, 35-65% R.H. A controlled environment is recommended.
Store in original packaging.

MFG Part number: KPTEX4200

KODAK PHOTO TEX Repositionable Fabric is ideal for life-size photographic cut-outs for walls and wall murals. It also works great for a variety of indoor and outdoor applications, including windows, backlits, doors, sign boards, and other flat surfaces.

It does not remove paint from a primed wall and can safely be applied over wallpaper without wrinkles or ripping. This Repositionable Fabric is compatible with both piezo and thermal printhead technologies.

 

Technical Specifications

Material

40-45% polyester, 40-45% pulp-cellulose

Gauge

10 mil (557kg/m): Base 6 mil, liner 4 mil

Weight

240 gsm

Ink Compatibility

eco-solvent, solvent and uv-curable.

Software Setting

Optimized printer settings will vary from printer manufacturers. A fine art paper or matte paper setting is an appropriate starting point. However, we recommend that you try different settings to achieve optimum performance for your specific application.

Color Matching

For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software.

Finishing/Post Processing

Use a carbide knife for kiss and die cutting. For additional protection, liquid or spray coatings are recommended. Recommended outdoors for up to six months without additional protection.

Lightfastness

The fading time of inkjet ink is a direct result of the inks you choose and the environment where the print is displayed. Contact the ink manufacturer to determine suitability for a particular application.

Optimal Service Environment

For printing: 59-77° F, 20-80% Relative Humidity For end use: 0 to 176° F

Handling Recommendations

Due to the absorptive nature of the coating, you should avoid touching the coated surface of the film. To install the graphic, peel 4 inches of the liner off the graphic and place on wall. Continue to peel back 4 inches of the liner incrementally while mounting.

Ideal Storage Conditions

50-80° F, 35-65% R.H. A controlled environment is recommended.
Store in original packaging.

MFG Part number: KPTEX4200

Products specifications
Media Type Photo Tex
Roll Width 42"
Weight 240 gsm
Type Aqueous
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Products specifications
Media Type Photo Tex
Roll Width 42"
Weight 240 gsm
Type Aqueous