Kodak PHOTO TEX Fabric, 24" x 100' - Aqueous

KODAK Aqueous Photo Tex Repositionable Fabric is ideal for life-size photographic cut-outs for walls and wall murals. It also works great for a variety of indoor and outdoor applications, including windows, backlits, doors, sign boards, and other flat surfaces. 24' x 100', 10 mil, 240 g/m | SKU 11689
SKU: 11689
Manufacturer part number: KPT2400
Manufacturer: Kodak
$277.33

The adhesive for KODAK's Photo Tex Fabric is removable, reusable, and repositionable. It does not remove paint from a primed wall, is safe to apply over wallpaper, applies without wrinkles, and does not rip. This version is compatible with both piezo and thermal printhead technologies.

 

 Technical Specifications

Material

40-45% polyester, 40-45% pulp-cellulose

Gauge

10 mil (557kg/m): Base 6 mil, liner 4 mil

Weight

240 gsm

Printer/Ink Compatibility

Canon, Epson, Encad, Hewlett-Packard, Mutoh, Mimaki, and Roland with pigment-based inks.

Software Setting

Optimized printer settings will vary from printer manufacturers. A fine art paper or matte paper setting is an appropriate starting point. However, we recommend that you try different settings to achieve optimum performance for your specific application.

Color Matching

For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software.

Finishing/Post Processing

Use a carbide knife for kiss and die cutting. For additional protection, liquid or spray coatings are recommended. Recommended outdoors for up to six months without additional protection.

Lightfastness

The fading time of inkjet ink is a direct result of the inks you choose and the environment where the print is displayed. Contact the ink manufacturer to determine suitability for a particular application.

Optimal Service Environment

For printing: 59-77° F, 20-80% Relative Humidity For end use: 0 to 176° F

Handling Recommendations

Due to the absorptive nature of the coating, you should avoid touching the coated surface of the film. To install the graphic, peel 4 inches of the liner off the graphic and place on wall. Continue to peel back 4 inches of the liner incrementally while mounting.

Ideal Storage Conditions

50-80° F, 35-65% R.H. A controlled environment is recommended. Store in original packaging.

 

 

MFG Part number: KPT2400

The adhesive for KODAK's Photo Tex Fabric is removable, reusable, and repositionable. It does not remove paint from a primed wall, is safe to apply over wallpaper, applies without wrinkles, and does not rip. This version is compatible with both piezo and thermal printhead technologies.

 

 Technical Specifications

Material

40-45% polyester, 40-45% pulp-cellulose

Gauge

10 mil (557kg/m): Base 6 mil, liner 4 mil

Weight

240 gsm

Printer/Ink Compatibility

Canon, Epson, Encad, Hewlett-Packard, Mutoh, Mimaki, and Roland with pigment-based inks.

Software Setting

Optimized printer settings will vary from printer manufacturers. A fine art paper or matte paper setting is an appropriate starting point. However, we recommend that you try different settings to achieve optimum performance for your specific application.

Color Matching

For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software.

Finishing/Post Processing

Use a carbide knife for kiss and die cutting. For additional protection, liquid or spray coatings are recommended. Recommended outdoors for up to six months without additional protection.

Lightfastness

The fading time of inkjet ink is a direct result of the inks you choose and the environment where the print is displayed. Contact the ink manufacturer to determine suitability for a particular application.

Optimal Service Environment

For printing: 59-77° F, 20-80% Relative Humidity For end use: 0 to 176° F

Handling Recommendations

Due to the absorptive nature of the coating, you should avoid touching the coated surface of the film. To install the graphic, peel 4 inches of the liner off the graphic and place on wall. Continue to peel back 4 inches of the liner incrementally while mounting.

Ideal Storage Conditions

50-80° F, 35-65% R.H. A controlled environment is recommended. Store in original packaging.

 

 

MFG Part number: KPT2400

Products specifications
Media Type Photo Tex
Type Aqueous
Finish Matte
Roll Width 24"
Weight 240 gsm
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Products specifications
Media Type Photo Tex
Type Aqueous
Finish Matte
Roll Width 24"
Weight 240 gsm