|
40-45% polyester, 40-45% pulp-cellulose
|
|
10 mil (557kg/m): Base 6 mil, liner 4 mil
|
|
|
|
eco-solvent, solvent and uv-curable.
|
|
Optimized printer settings will vary from printer manufacturers. A fine art paper or matte paper setting is an appropriate starting point. However, we recommend that you try different settings to achieve optimum performance for your specific application.
|
|
For the best and most consistent results, a profile should be created using an external color calibrator in conjunction with your RIP and color matching software.
|
Finishing/Post Processing
|
Use a carbide knife for kiss and die cutting. For additional protection, liquid or spray coatings are recommended. Recommended outdoors for up to six months without additional protection.
|
|
The fading time of inkjet ink is a direct result of the inks you choose and the environment where the print is displayed. Contact the ink manufacturer to determine suitability for a particular application.
|
Optimal Service Environment
|
For printing: 59-77° F, 20-80% Relative Humidity For end use: 0 to 176° F
|
|
Due to the absorptive nature of the coating, you should avoid touching the coated surface of the film. To install the graphic, peel 4 inches of the liner off the graphic and place on wall. Continue to peel back 4 inches of the liner incrementally while mounting.
|
|
50-80° F, 35-65% R.H. A controlled environment is recommended. Store in original packaging.
|